Mine Bitcoins with Cgminer On Ubuntu - Bitcoin Exchange ...

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg
How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1
NENG v1.4.0 Android Mining, randomSpike Evaluation https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/NENG_2020_Q3_report/NENG_2020_Q3_report.pdf
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2020Q1_Report/Scrypt_RandomSpike_NENGv1.3.0_Hardfork_Proposal.pdf
NENG Security, Decentralization & Valuation
Whitepaper v1.0 https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/whitepaper_v1.0/NENG_WhitePaper.pdf
DISCORD https://discord.gg/UPeBwgs
http://www.findblocks.com/exploreNENG http://nengexplorer.mooo.com:3001/
Step by step guide on how to setup an explorer: https://github.com/ShorelineCrypto/nengexplorer
Github https://github.com/ShorelineCrypto/NewEnglandCoin
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.5
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.3
MacOS Wallet (10.11 El Capitan or higher): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.2
Android with GNUroot on 32 bits old Phones (alpha release) wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0
Windows wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.3.0.1
addnode ip address for the wallet to sync faster, frequently updated conf file: https://github.com/ShorelineCrypto/cheetah_cpumineblob/mastenewenglandcoin.conf-example
How to Sync Full Node Desktop Wallet https://www.reddit.com/NewEnglandCoin/comments/er6f0q/how_to_sync_full_node_desktop_wallet/
TWITTER https://twitter.com/newenglandcoin
REDDIT https://www.reddit.com/NewEnglandCoin/
Cheetah CPU Miner Software https://github.com/ShorelineCrypto/cheetah_cpuminer
Solo Mining with GPU or ASIC https://bitcointalk.org/index.php?topic=5027091.msg52187727#msg52187727
How to Run Two Full Node in Same Desktop PC https://bitcointalk.org/index.php?topic=5027091.msg53581449#msg53581449
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708 (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
FindBlocks http://findblocks.com/
CRpool http://crpool.xyz/
Cminors' Pool http://newenglandcoin.cminors-pool.com/
SPOOL https://spools.online/
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support https://bitcointalk.org/index.php?topic=5027091.msg55098029#msg55098029
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support https://bitcointalk.org/index.php?topic=5027091.msg54977437#msg54977437
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros https://bitcointalk.org/index.php?topic=5027091.msg54898540#msg54898540
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina https://bitcointalk.org/index.php?topic=5027091.msg54839522#msg54839522
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade https://bitcointalk.org/index.php?topic=5027091.msg54830333#msg54830333
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support https://bitcointalk.org/index.php?topic=5027091.msg54803639#msg54803639
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation https://bitcointalk.org/index.php?topic=5027091.msg54777222#msg54777222
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020 https://bitcointalk.org/index.php?topic=5027091.msg54694233#msg54694233
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode https://bitcointalk.org/index.php?topic=5027091.msg54645726#msg54645726
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing https://bitcointalk.org/index.php?topic=5027091.msg54030923#msg54030923
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1 https://bitcointalk.org/index.php?topic=5027091.msg53900926#msg53900926
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork https://bitcointalk.org/index.php?topic=5027091.msg53735458#msg53735458
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff https://bitcointalk.org/index.php?topic=5027091.msg53617358#msg53617358
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply https://www.reddit.com/NewEnglandCoin/comments/envmo1/explanation_of_base_diff_reset_and_effect_of/
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released https://bitcointalk.org/index.php?topic=5121953.msg53391184#msg53391184
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin https://bitcointalk.org/index.php?topic=5027091.msg52331201#msg52331201
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC https://bitcointalk.org/index.php?topic=5027091.msg52169572#msg52169572
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release https://bitcointalk.org/index.php?topic=5027091.msg51745839#msg51745839
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc https://bitcointalk.org/index.php?topic=5027091.msg51312291#msg51312291
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto https://bitcointalk.org/index.php?topic=5027091.msg50714764#msg50714764
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation https://bitcointalk.org/index.php?topic=5027091.msg50506585#msg50506585
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50417196#msg50417196
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50332097#msg50332097
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50208194#msg50208194
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated https://bitcointalk.org/index.php?topic=5027091.msg49931305#msg49931305
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin https://bitcointalk.org/index.php?topic=5027091.msg49875242#msg49875242
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork https://bitcointalk.org/index.php?topic=5027091.msg49831059#msg49831059
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork https://bitcointalk.org/index.php?topic=5027091.msg49685389#msg49685389
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac https://bitcointalk.org/index.php?topic=5027091.msg49218760#msg49218760
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet https://bitcointalk.org/index.php?topic=5027091.msg49202088#msg49202088
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows https://bitcointalk.org/index.php?topic=5027091.msg49004345#msg49004345
Dec 31, 2018 - Technical Whitepaper is Released https://bitcointalk.org/index.php?topic=5027091.msg48990334#msg48990334
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux https://bitcointalk.org/index.php?topic=5027091.msg48935135#msg48935135
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue https://bitcointalk.org/index.php?topic=5027091.msg48668375#msg48668375
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48258465#msg48258465
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC https://bitcointalk.org/index.php?topic=5027091.msg48298311#msg48298311
Nov 29, 2018 - A Warning to ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

Creating a Headless Staking Node on Ubuntu 18.04

Creating a Headless Staking Node on Ubuntu 18.04
##UPDATE## Step 8 - Option 2, has some bugs in the final build process. i haven't had time to work them out yet!

This guide will take you through building and running a headless x42 Full Node! The OS I am using here is Ubuntu 18.04, this guide picks up from a complete/fresh ubuntu install.
This is meant to setup a staking node and so this guide will run you through building, configuring and setting up staking. It will not cover sending transactions or anything else.
The things we are going to do:
  • Step 1 - Install .net core
  • Step 2 - Download The x42 Node Source & Compile It
  • Step 3 - Setting The x42 Node Up To Run On Boot
  • Step 4 - Setup A New Wallet
  • Step 5 - Configure The x42 Daemon
  • Step 6 - Get Address
  • Step 7 - Check Balance
  • Step 8 - Connect The UI Wallet To A Headless Node
  • Step 8 - [Option 1 - Use Installer] Connect The UI Wallet To A Headless Node
  • Step 8 - [Option 2 - Build/Compile UI Only] Connect The UI Wallet To A Headless Node # BROKEN#

Step 1 - Install .net Core

Here is the reference link:
Register Microsoft Key’s & Install Their repos:
cd /tmp wget -q https://packages.microsoft.com/config/ubuntu/18.04/packages-microsoft-prod.deb sudo dpkg -i packages-microsoft-prod.deb sudo add-apt-repository universe sudo apt -y install apt-transport-https sudo apt update sudo apt -y install dotnet-sdk-2.2 
Microsoft collect telemetry data by default, if you are part of the “tin foil hat brigade” you can set the following environment variable to turn it off:
echo "DOTNET_CLI_TELEMETRY_OPTOUT=1" >> /etc/environment 
now you should be at a point where .net core is installed on your system… that wasn’t so hard was it! You can check by running the following command:
The output should look like this:
$ dotnet --list-sdks 2.2.103 [/usshare/dotnet/sdk] 

Step 2 - Download & Compile The x42 Node

This part assumes you have GIT installed, if not:
apt -y install git 
Now to pull down the source and compile it!
cd ~/ git clone https://github.com/x42protocol/X42-FullNode.git # “cd” into the source folder cd X42-FullNode/src/ 
Now .net core uses NuGet for package management, before we compile, we need to pull down all of the required packages.. its as simple as running (this will take a couple of minutes) inside of “X42-FullNode/src/”:
dotnet restore 
now we are ready to compile the source, execute (inside of “X42-FullNode/src/”):
dotnet build --configuration Release 
ignore the yellow warnings, this is just the rosyln compiler having a grumble.. if you get red ones then something went wrong! The “--configuration Release” will strip out all debug symbols and slim things down.. only a little, this optional parameter is not mandatory.
Once this is done everything is built/compiled, you can run the daemon directly from the repository, this can be done by going to:
cd ~/X42-FullNode/src/x42.x42D/bin/Release/netcoreapp2.1 dotnet x42.x42D.dll 
this will kick off the node, however if you exit SSH at this time it will kill the process! however I always recommend copying out the binaries to a separate folder. This can be done with the following:
mkdir ~/x42node mv ~/X42-FullNode/src/x42.x42D/bin/Release/netcoreapp2.1/*.* ~/x42node/ 
now we have everything we need to run the node outside the git repository! What we need to do now is run the node and have it create the default x42.conf file.. so
cd ~/x42node dotnet x42.x42D.dll 
feel free to hit “CTRL + C” to exit the application after a couple of seconds, by then the folders/files would have been created at the following path:

Step 3 - Setting The x42 Node Up To Run on Boot

Now we are going to create a service file so our x42 node automatically starts when the system is rebooted.
THINGS TO NOTE ABOUT BELOW.. CHANGE THE ##USER## to the username your currently using as these files are within your home directory!
We need to drop to root for this..
sudo -i cat < /etc/systemd/system/x42node.service [Unit] Description=x42 Node [Service] WorkingDirectory=/home/##USER##/x42node ExecStart=/usbin/dotnet /home/##USER##/x42node/x42.x42D.dll Restart=always # Restart service after 10 seconds if the dotnet service crashes: RestartSec=10 SyslogIdentifier=x42node User=##USER## Environment=ASPNETCORE_ENVIRONMENT=Development [Install] WantedBy=multi-user.target EOF 
To enable the service, run the following (as the root user):
systemctl enable x42node.service 
BOOM.. the node isn’t running yet.. but next time the system restarts it will automatically run!
now lets exit out of root!
We can now start the node up and begin downloading blocks, by running the following command:
sudo systemctl start x42node.service 
if you want to check its loaded and see some of the output, you can run:
sudo systemctl status x42node.service 
an example of the output:
$ sudo systemctl status x42node.service ● x42node.service - x42 Node Loaded: loaded (/etc/systemd/system/x42node.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2019-01-24 15:47:55 UTC; 14s ago Main PID: 5456 (dotnet) Tasks: 23 (limit: 1112) CGroup: /system.slice/x42node.service └─5456 /usbin/dotnet /home/darthnoodle/x42node/x42.x42D.dll Jan 24 15:48:09 x42staking x42node[5456]: Batch Size: 0 Mb (0 headers) Jan 24 15:48:09 x42staking x42node[5456]: Cache Size: 0/50 MB Jan 24 15:48:09 x42staking x42node[5456]: Jan 24 15:48:09 x42staking x42node[5456]: =======Mempool======= Jan 24 15:48:09 x42staking x42node[5456]: MempoolSize: 0 DynamicSize: 0 kb OrphanSize: 0 Jan 24 15:48:09 x42staking x42node[5456]: Jan 24 15:48:09 x42staking x42node[5456]: info: Stratis.Bitcoin.Connection.ConnectionManagerBehavior[0] Jan 24 15:48:09 x42staking x42node[5456]: Peer '[::ffff:]:52342' connected (outbound), agent 'x42:1.2.13 (70012)', height 213920 Jan 24 15:48:09 x42staking x42node[5456]: info: Stratis.Bitcoin.Connection.ConnectionManagerBehavior[0] Jan 24 15:48:09 x42staking x42node[5456]: Peer '[::ffff:]:52342' offline, reason: 'Receiving cancelled.'. All node screen output can be found in the /valog/syslog file. 

Step 4 - Setup a New Wallet

With the Node running, we now need to setup and/or restore a wallet!
Everything will be performed through the API’s, however by default these API’s are listening on localhost (, if you are connecting in remotely then this would be a problem since you cant hit that IP. The solution, SSH TUNNEL!
Execute the following command on your local system:
ssh -L 42220:localhost:42220 @ 
This binds the local port (on your system) with on the remote system, once you have executed the command you can type the following address in your laptop/desktop’s web browser and be able to access the API’s: 
It should look something like this:
To Create a new wallet, first we have to generate some mnemonic works (e.g. the seed), you can do that by going to the following API:
Hit the “Try it out” button which then prompts you for 2 fields:
Enter “English” and I would recommend 24 words as this greatly increases the seed strength! Once that is done you hit execute and then scroll down to see the “Response Body”, this should contain the mnemonic which you are going to use to create the wallet! This looks something like below:
So now we have our mnemonic, its time to generate the wallet, for this we need to use the API:
There are a number of parameters which are required in order to create a wallet:
WalletCreationRequest{ mnemonic string password* string passphrase* string name* string } 
It should be noted that the password and mnemonic are is the most important parts of this request where the “password” will encrypt the wallet and Is required to unlock it.
  • Hit the “Try it out” button
  • input the necessary data
  • Insert the mnemonic
  • Put a password & passphrase
  • “Name” is what your wallet will be called
It should look something like the following:
Hit “Execute”, the “Loading” sign may spin for a few minutes while the wallet is created… once the wallet has been created the “Response Body” will return the mnemonic you have just used.. we now have a wallet!!
This is where we will now jump back out and to configure the node to automatically load the wallet and automatically start staking when it first loads.

Step 5 - Configure The x42 Daemon

Now we are going to modify the x42.conf file in order to automatically load our wallet and start staking 😊
First things first, lets stop our node by running the following command:
sudo systemctl stop x42node.service 
CD to the following folder and view its contents:
~/.x42node/x42/x42Main ls -lah 
within that folder there should be 2 files you are interested in:
-rw-r--r-- 1 darthnoodle darthnoodle 18K Jan 28 16:01 TestWallet.wallet.json -rw-rw-r-- 1 darthnoodle darthnoodle 3.1K Jan 24 15:25 x42.conf 
So TestWallet.wallet.json is our physical wallet that will be loaded, but for right now we want to modify the x42.conf file.. fire up your favourite text editor (if you use VI you’re a masochist)..
nano x42.conf 
The area we are interested in is the following:
####Miner Settings#### #Enable POW mining. #mine=0 #Enable POS. #stake=0 #The address to use for mining (empty string to select an address from the wallet). #mineaddress= #The wallet name to use when staking. #walletname= #Password to unlock the wallet. #walletpassword= #Maximum block size (in bytes) for the miner to generate. #blockmaxsize=1000000 #Maximum block weight (in weight units) for the miner to generate. #blockmaxweight=1000000 #Enable splitting coins when staking. #enablecoinstakesplitting=1 #Minimum size of the coins considered for staking, in satoshis. #minimumstakingcoinvalue=10000000 #Targeted minimum value of staking coins after splitting, in satoshis. #minimumsplitcoinvalue=10000000000 
Uncomment (remove the #) of the following lines and change their value:
stake=1 (changed to 1) walletname=TestWallet (changed to our Wallet Name) walletpassword=password123 (changed to the wallet password) 
save the file and exit back to the command prompt, now we shall restart the node with the following command:
sudo systemctl status x42node.service 
now the wallet is automatically loaded and ready for action!
You can check its loaded by going back to the API and executing the following command:
Or execute the following command on the NODE:
curl -X GET "" -H "accept: application/json" 
both will produce the same output, if you scroll to the bottom you should see something like this:
======Wallets====== TestWallet/account 0, Confirmed balance: 0.00000000 Unconfirmed balance: 0.00000000 
This means the wallet is loaded and ready for action!!

Step 6 - Get Addresses

Next thing you are probably going to want is a receive address and to check the balance and TX history.. so lets start with getting an address!
Go to the following API:
Fill in the Wallet name which is “TestWallet” (in this example) and “account 0” (which is the first/default account):
Hit execute and you should have an x42 address within the “Response Body”:

BOOM… ok now we can receive funds! 😊

Step 7 - Check TX History

Go to the API and the following call:
The 2 fields we are most concerned about are:
Input the name of the wallet and account you want to view the history of, then hit execute. The other fields can be black. This will return a list of TX’s that the wallet has received:
This should look like the following:
There is an easier way of doing this, that doesn’t require you to be connected to your node.. especially if your only interested in viewing your staking rewards… THE EXPLORER!
Access the following URL:
this will allow you to easily see all TX’s associated with this address, it should look something like below:
… and your done! By this point your node should be running, staking and you have an easy way to view transactions/rewards 😊

Step 8 - Connect The UI Wallet To A Headless Node

The UI utilises a combination of technologies, however the important part is the code attempts to access the x42 Node API on
So you have 2 options here:
  1. Download the Wallet Installers
  2. Compile The UI Yourselves
Pick the option that best suits you given the pros/cons below:
Option 1 - Pro's/Cons
  • If you use the installer, its quick and easy.
  • This also installs an x42 node on your system which runs when the UI loads.
  • If you dont setup an SSH tunnel before running the wallet the local node will bind to the port and the tunnel wont work.. you will be connecting to the local wallet!!
Option 2 - Pro's/Cons
  • You only run the UI, the x42 node is not installed
  • you dont have a superfluous node running, downloading blocks on your local system
  • Time Consuming
  • Have to download dependencies and manually compile the code

Pre-Requirement - Needed For Both Options!!
As previously mentioned, the UI attempts to access the API's on, however our node isnt running on our local system. IN ORDER TO GET IT WORKING YOU NEED TO HAVE AN SSH TUNNEL, THIS TUNNEL NEEDS TO REMAIN ACTIVE WHENEVER YOU WANT TO ACCESS THE WALLET.
this can be done by executing the following command:
ssh -L 42220:localhost:42220 @ 

Step 8 - [Option 1 - Use Installer] Connect The UI Wallet To A Headless Node

Download and install the UI/Wallet & Node from:

Those of us who dont want to run a local node and just want the UI, execute the following commands (as an administrator):
cd C:\Program Files\x42 Core\resources\daemon\ ren x42.x42D.exe x42.x42D.exe.bak 
The above is with Windows, if your are in *NIX then locate the daemon and rename it (i will update how to do that/where to find it shortly)
Setup the SSH tunnel as outlined above, Execute the wallet and it will load, however you will see an exception:

dont worry, this is just the wallet trying to execute/start the x42 node which we dont want, if all works according to plan.. after you click "OK" you should now be presented with the wallet UI and have the option to select what wallet you would like to load:

... DONE!

Step 8 - [Option 2 - Build/Compile UI Only] Connect The UI Wallet To A Headless Node ###BROKEN


Ok, this is the fun bit! .. we need to install the following dependencies. these instructions are written for a Windows system but it should be easy enough to perform the same on a *NIX system.
Install Dependencies
In order to build the wallet UI, you need to install the following components:
  • git
  • NodeJS
  • Electron Builder
First thing you need to do is install git, so download and install the package:
Next you need to install NodeJS, download and install the package:
Next we need to install the node package manager:
npm install npx –verbose 
next we need to make sure we have Visual Studio build tools and Python (2.7) installed, this can be done by executing the following (AS AN ADMINISTRATOR!):
npm install -g --production windows-build-tools 
this will install the necessary tools to build C#/C++ code and python 2.7, this could take some time! When its done you should have something like the following;


Build & Install - Windows
Create a temp folder to navigate to a folder where you want to download the GIT repository, execute the following command:
git clone https://github.com/x42protocol/X42-FullNode-UI.git 
This will clone the repository into the folder, it will only clone the wallet and not the Node source! now lets CD into the folder and build the UI:
cd X42-FullNode-UI\FullNode.UI npm install 
This will download and install all dependencies (can take a while), at the end you should see something like..

Now the stock UI has a number of third-party libraries which contain some vulnerabilities, being a security conscious person, ive also run:
npm audit fix 
when this is done, we have fixed most of the package vulnerabilities 😊 We also get a complaint about the typescript library being too new for the version of angular in use, so run the following command to install the additional dependency:
npm install [email protected]">=2.4.2 <2.7.0" 
now its time to build the UI, execute the following:
npm run build:prod 
once complete you should see something like the following..

Next its time to compile the electron binary, it should be noted that the build/package process utilises AppVoyer which is not installed and if you attempt to build right now you will get the following error:
cannot expand pattern "${productName}-v${version}-setup-${os}-${env.arch}.${ext}": env arch is not defined. 
To fix this we need to modify the build file, this is a quick one liner that can do it:
powershell -Command "(gc electron-builder.json) -replace 'env.arch', 'arch' | Out-File electron-builder.json" 
Essentially the offending line for Windows is..
"artifactName": "${productName}-v${version}-setup-${os}-${env.arch}.${ext}" 
The build cannot resolve “env.arch”, so the above one liner replaces “env.arch” with “arch” which works 😊
execute the following command:
npx electron-builder build --windows --x64 
At present i get the following error, no matter what i do.. and ive ran out of time to go hunting about.. if anyone has any ideas on how to fix then please post in here or message me on discord:


Happy staking!

If you found this post helpful, then buy me a beer and send a donation to XQXeqrNFad2Uu7k3E9Dx5t4524fBsnEeSw
submitted by D4rthNoodle to x42 [link] [comments]


To all DECENTants,
I would like to encourage you to become a seeder or witness (actually not miner) on DECENT.


As a pioneer with Bitcoin I truly believed in the DCT project and it's proposal. The first day of the ICO release I sent all my BTC balance to the DECENT. Not knowing when and what they will deliver. To participate in this great adventure means a lot to me. Another project from my home country I strongly encourage you to get familiar with is Ethereum. I have been an early CPU miner: before Crypto Currency I used to compute for sience projects grid for Clean Water and Cancer Research. If I hadn't bought Rainforest with the Ripple they distributed to all contributors, I'd be a rich man today. :P











GRAPHENE CLI Wallet Cookbook





A dedicated server with Linux Ubuntu 16.04 LTS is most recommend for 24/7 operation. I suggest you close the root and create a new user with SSH Key, secure the system with a firewall.

1. Create a new user

adduser bob 

2. Elevate him

usermod -aG sudo bob 

3. Generate a new keyset


4- Bind the new keys

ssh-copy-id [email protected]_server_ip 
Copy the keys to your local drive. You'll need them to connect.

5. Change the config file

sudo nano /etc/ssh/sshd_config 
Change Line PasswordAuthentication no

6. Finish with

sudo systemctl reload sshd 

7. Login with your ssh key, user and password

ssh [email protected]_server_ip 


1. Grab your tools

sudo apt-get update sudo apt-get install build-essential autotools-dev automake autoconf libtool make cmake checkinstall realpath gcc g++ flex bison doxygen gettext git qt5-default libqt5svg5-dev libreadline-dev libcrypto++-dev libgmp-dev libdb-dev libdb++-dev libssl-dev libncurses5-dev libboost-all-dev libcurl4-openssl-dev python-dev libicu-dev libbz2-dev 

2. Download and build Boost 1.60.0

mkdir -p ~/dev/DECENTfoundation/DECENT-Network-third-party cd ~/dev/DECENTfoundation/DECENT-Network-third-party rm -rf boost_1_60_0* boost-1.60.0* wget https://sourceforge.net/projects/boost/files/boost/1.60.0/boost_1_60_0.tar.gz tar xvf boost_1_60_0.tar.gz mkdir boost-1.60.0_prefix cd boost_1_60_0 export BOOST_ROOT=$(realpath ../boost-1.60.0_prefix) ./bootstrap.sh --prefix=$BOOST_ROOT ./b2 install cd .. rm -rf boost_1_60_0 boost_1_60_0.tar.gz 


1. Clone the repo

mkdir -p ~/dev/DECENTfoundation cd ~/dev/DECENTfoundation #via ssh $ git clone [email protected]:DECENTfoundation/DECENT-Network.git #via url $ git clone https://github.com/DECENTfoundation/DECENT-Network.git cd DECENT-Network git submodule update --init --recursive 

2. Build and install Decent

mkdir -p ~/dev/DECENTfoundation/DECENT-Network-build cd ~/dev/DECENTfoundation/DECENT-Network-build cmake -G "Unix Makefiles" -D CMAKE_BUILD_TYPE=Debug ~/dev/DECENTfoundation/DECENT-Network cmake --build . --target all -- -j -l 3.0 cmake --build . --target install 


You don't want your server to shut down the process when you lose connection or quit.
I use tmux. Though nohup is sufficient for infrequent access. Use it when you fire up decentd after miner setup.
nohup ./decentd & disown 

1. RUN decentd - On first run decentd will create .decent in the home directory.

Always close it via Ctrl+C to save the current state Ctrl+S Freeze Ctrl+Q Resume

2. Get HELP

cd ~/dev/DECENTfoundation/DECENT-Network-build/artifacts/prefix/bin/ ./decentd -h 

3. RUN cli_wallet

Close it with Ctrl+D

4. USE cli_wallet

set_password xy unlock xy 

5. IMPORT your account

import_key decentgo_username your_private_key 

6. CREATE 3 sets of keys for your new account

write them down, don't use the ones below. ;)

1. new owner key


2. new active key

{ "brain_priv_key2": "FUSION BLART JAIL FESTAL LAXNESS ROSTEL TITI VANADYL PUG BATATA KAIK ROSETY STUCCO TETE BEMUDDY WUDGE", "wif_priv_key2": "5HvsjRsokHSeeUdRkM88JgLzYJ6vnc2e35CzyZNRnmh1fvm91Jz", "pub_key2": "DCT7G7KeUnMPVKXN2y8M7BnyosLRE3LtSnNp7kbxtYd9xHiBoX6wd" } 

3. new public signing key


7. CREATE your new account

register_account new_username pub_key1 pub_key2 decentgo_username true 

8. SEND some DCT to your new account

transfer decentgo_username target_username 3.00 DCT "memo" true 

9. IMPORT the new account

import_key new_username wif_priv_key2 

10. Close the Wallet and edit the config.ini inside /root/.decent/data/decentd/

private-key = ["pub_key2","wif_priv_key2"] 

11. Launch again and create your miner

create_miner username "proposal URL" true 

12. Change your signing key to 3rd keypair from suggest_brain_key

update_miner username "proposal URL" public_key3 true 

13. Edit the config.ini again inside /root/.decent/data/decentd/

enable-stale-production = true miner-id = "1.4.X" private-key = ["pub_key3","wif_priv_key3"] 

Your Server is now ready to run a DECENT witness.

Be aware that you should not close your daemon at any time.


get_brain_key_info dump_private_keys get_private_key public-key get_account texxi get_miner texxi list_my_accounts list_account_balances texxi set_desired_miner_count username 99 

Now get some support for your miner and join the community!


You can vote for me and I will gladly return the favor. Please make sure your server runs stable and you're not missing any blocks. Good Luck!

vote_for_miner username texxi true true

All voters will receive early preview access to my first cryptocurrency trading tool to be released in 2018. But remember: Always trade for good and invest in green.

submitted by Texxer to Decentplatform [link] [comments]

Zeus/Gaw ASIC Setup Guide for Linux/Raspberry Pi

So I recently I became quite interested in mining and cyptocurrencies in general. So interested in fact that I bit the bullet and decided to buy myself a GAW Fury.
I then spent some time doing research on how to set up a GAW or Zeus ASIC on Linux, in particular on a Raspberry Pi, and have found most guides to be awful. The reason they are so bad IMHO is that they assume quite a bit of prior knowledge, either with Linux or mining, and give very little instructions. So I have tried to put together a guide that requires very little prior knowledge.
It is my aim that anyone could get their shiny new asic up and mining in no time using this guide. Anyway, I present...

The Complete Noobs Guide to Setting Up a Zeus or Gaw ASIC on Debian/Ubuntu/Raspberry Pi


About Cyrptocurrencies and Their Jargon

If you are new to cryptocurrencies and how they work I suggest taking a look at this series of KhanAcademy videos. They are for Bitcoin but the theory is the same. I found them very helpful when it came to understanding what mining actually does and the mechanics of cyrptocurrencies.
Also take a look at sircamm22 his info found here, is great and breaks down a large number of concepts. I slightly disagree with no. 21 regarding preordering. Just exercise common sense.


If you are new to Linux you could follow along by simply typing in the commands. However I highly recommend taking the time to learn what you are doing. This course is a great place to start.

Computer Setup

By the end of this section you will have your device turned on, fully setup and connected to the internet with.
Note: Commands to be typed into the command line will be displayed like this:
echo Hello World


For laptops and desktops already running Ubuntu or Debian I will assume you have setup your internet setup as part of the installation.
If not: There are plenty of guides out there and the installation/setup process is very easy. A good place to start for Ubuntu is here.
Now open up a terminal window. Ctrl + alt + t on a standard Ubuntu installation.
If you plan on using this PC without a monitor I would suggest installing an SSH Server.
These commands will be discussed later on in the guide.
sudo apt-get -y install openssh-server
sudo service openssh-server start

Raspberry Pi

The Raspberry Pi Foundation has put together a great guide in PDF format.
Use NOOBS it will save you a lot of trouble. NB: Some SD cards don't support NOOBs but will work fine if the image is put on using a different method.
Here is a great guide for setting up the Raspberry Pi SD card from Elinux.org. In fact it's a great place to start for anything RPi related. Raspberry Pi hub at Elinux.
Once the SD card is setup you will need to insert it into the Raspberry Pi and boot. Install Raspbian from the NOOBs menu and wait.
Follow this guide by Adafruit for first time setup. You will need to enable SSH Server.
I suggest not starting the desktop on boot. It can be easily run from the command line by typing startx.
Follow this guide by Adafruit to setup your network. Found here. No need to do this if you set up previously in the first time config.
We will also at this point want to setup ssh. Again I will point you to an Adafruit guide.
Once done exit back to a standard command line interface. This can be done in LXDE by using the power off menu located in the bottom right corner.

Miner Setup

Installing BFGMiner

If you want to the Raspberry Pi or PC without a monitor go ahead and SSH into your device.
So now you should be staring at a command line interface whether on the device with a monitor or via SSH.
First things first lets make sure we are all up to date. This will update our package list from the repositories and upgrade them to the newest version. "-y" Will simply say yes to any prompts.
sudo apt-get update && sudo apt-get -y upgrade
We are going to need to install some useful tools. Git-core is how we will clone and download BFGMiner from GitHub and Screen allows multiple command line instances and means if we exit out of ssh session or quit Terminal on Ubuntu, BFGMiner will continue to run.
sudo apt-get install git-core screen
We also need to download some other tools/dependencies to ensure that BFGMiner will compile successfully.
sudo apt-get -y install build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev libevent-dev libmicrohttpd-dev libc-bin
Ok now change into your home directory.
cd ~
And clone BFGMiner by Darkwinde.
git clone https://github.com/Darkwinde/bfgminer.git
Once the download has completed move into the bfgminer directory.
cd bfgminer
The following steps may take a while.
Now run autogen.sh
sudo ./autogen.sh
You will need to make the configure script execuitable.
sudo chmod +x ./configure
Now configure bfgminer
sudo ./configure CFLAGS="-O3" --enable-scrypt
Now lets make!
sudo make
Install BFGMiner
sudo make install
One more thing...
sudo ldconfig

Running BFGMiner

If you haven't already plug in your ASIC.
Just confirm your system is recognising the ASIC.
Its output should look similar to this (no need to type this in):
Bus 001 Device 005: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Yep there it is our ASIC listed as device 005. There is no need to install any drivers, unlike in windows, as they come in the kernel.
Now lets actually start BFGMiner.
You will want to start a screen session to ensure BFGMiner doesn't quite when you exit.
"-S" is the option for starting a new screen session. You can replace "miner" with anything you like.
screen -S miner
Now you can run the commands below.
Here is a sample of what you should type. You will need to replace somethings with your own values.
sudo bfgminer --scrypt -o stratum+tcp://URL:PORT -u USERNAME -p PASSWORD --zeus-cc CHIPCOUNT --zeus-clk 328 -S zeus:/dev/ttyUSB0
URL:PORT is the address and port of the pool you wih to use. Now I won't suggest a pool. I will leave that decision up to you. If you do wish to mine DOGE take a look at this site for a list of pools and comparisons.
USERNAME this is the username you use on the pool. Every pool is different. Check your pool's website for details. PASSWORD same as above. Specific to your pool, not every pool requires one.
CHIPCOUNT this is specific to which ASIC you are using.
For GAWMiner ASIC's:
  • War Machine: 256
  • Falcon: 128
  • Black Widow: 64
  • Fury: 6
For ZeusMiner ASIC's:
  • Blizzard: 6
  • Cyclone: 96
  • Hurricane X2: 48
  • Hurricane X3: 64
  • Thunder X2: 96
  • Thunder X3: 128
Now to make sure you don't stop mining when you exit ssh or terminal. Press:
ctrl + a + d
To come back to the BFGMiner screen simply run:
screen -r miner
You're done!!

Start on Boot

First off you will want to make sure you have BFGMiner running correctly. Ensure you have the miners set up properly and your pool correctly configured.
Start a BFGMiner instance, detailed above.
Once the instance has started and you are happy with how everything is working press "s" on your keyboard to enter the settings menu.
Now press the "w" key. Don't press enter. We want to specify where our config will go. Type:
Substitute USERNAME for your user. On a standard RPI install its pi. On ubuntu it's what you set during the instillation.
Now press the enter key to return back to the main BFGMiner screen. Press "q" on your keyboard to exit BFGMiner. You should now be back in the command line.
Now we want to edit a file called rc.local. Any commands in this file will be executed on boot.
sudo nano /etc/rc.local
Depending on your system this file may already contain some commands. Be careful not to delete them.
After the last command and before "exit 0" type the following on one line:
sudo -u USERNAME screen -d -m sudo bfgminer --config /home/USERNAME/bfgminer.conf
Where USERNAME = your username
Hit ctrl + x then y to save and exit nano.
The above command will create a new screen session and run bfgminer using the config we created earlier. All while as our username so that we can easily reattach.
Lets reboot to ensure it is working correctly:
sudo reboot
Once rebooted and logged in, show all running screen sessions:
screen -ls
Reattach to the session. You only need to use the numbers before the first dot.
e.g Mine looks like: 2480..hostname (13/07/14 12:02:09) (Detached). So I type:
screen -r 2480
Verify everything worked as expected. Then ctrl + a + d to exit.
You have now setup BFGMiner to restart on reboot.

Power Failure

If you are using a Raspberry Pi and it loses power it will automatically reboot on receiving power again.
For standard desktop PCs there is an option in some BIOS/UEFI to turn the computer on when it receives power. Consult your motherboard's manual and manufacturer's website.


Here is where I got my info from.
And of course /dogemining

Wrap Up

Congrats you've done it. You have managed to successfully get your shiny new asic mining away.
I do plan to make another guide detailing how to setup and use StarMiner a ready to go RPi mining distro.
So I hope this is helpful for you guys. I have seen lots of posts asking the exact same questions again and again and I have tried to answer these as best I can. I am still learning about this stuff so if there is something I have missed or a mistake I have made please tell me.
Anyway good luck. And I'll see you at the moon.
Cheers Frogsiedoodle
Edit 1: Layout and formatting.
Edit 2: Added instructions for screen which I initially forgot.
Edit 3: Removed 1 unneeded dependency
Edit 4: Added section on start on reboot and power failure.
submitted by Frogsiedoodle to dogemining [link] [comments]

Bitcoin mining ubuntu - YouTube How to install BFGminer on Ubuntu 17.04 Webchain CPU Miner Ubuntu 18.04 LTS Cryptocurrency Mining Software Tutorial Series 7 - Futurebit Moonlander 2 on Ubuntu 14.04 OS minar bitcoin con nicehash en ubuntu

Introduction Cgminer is an open source ASIC/FPGA bitcoin miner developed for a range of platforms, including Windows, Linux and OSx. It consists of sophisticated algorithms which are developed with C programming language to utilize the maximum hardware performance to yield a profitable amount of bitcoin with ease depending on the machine’s performance. I'm trying to Mine with ASICMiner's Block Erupters on Ubuntu 13.04. I've installed everything (bitcoin-qt, cgminer, bfgminer, I've got the block erupters in usb hubs hooked up to my ubuntu box). But WARNING: don't use cpuminer or any miner software on remote hosted machines, it's considered as an abuse of common resources and can be treated as an attack to the hosted system. NOTE: Bitcoin mining is very time consuming and you need a very powerful network of server machines to obtain even a small result (less than a bitcoin in most cases). Since Ubuntu is free of charge, it’s recommended to upgrade to at least Ubuntu 16.04 prior to following these steps. The installation assumes the user has either AMD or Nvidia hardware installed on the system, and some steps of the installation should be slightly altered depending on the graphics card. This article originally appeared on Joshua Powers’ blog. Ethereum. Ethereum has appeared more and more in the news and rightfully so. Ethereum recently set another transaction record of 400,000 transactions in a single day.Then the recent drama of the Bitcoin split has caused even more attention to Ethereum as an alternative. If you are unfamiliar with other Blockchain or Ethereum check out ...

[index] [35267] [26072] [33072] [18631] [27645] [38909] [48634] [28485] [43383] [15941]

Bitcoin mining ubuntu - YouTube

On this video I demonstrated compiling webchain miner on Ubuntu 18.04 LTS and mined on its official pool. How to mine Bitcoin/Litecoin using Ubuntu 14.04 In this video I show you how to mine bitcoin and litecoin while using ubuntu 14.04 please if you have any questions or concerns feel free to comment ... 13:51. How to make a ... How to Bitcoin Miner with Ubuntu VPS - Setup Nicehash Miner via Ubuntu VPS - Duration: 11:33. Cát Dự Trần 47,543 views. 11:33. How to Set Up a Bitcoin Mining Rig w ... minar bitcoin con nicehash en ubuntu aki os dejo los comandos: sudo apt-get install cmake build-essential libboost-all-dev git clone -b Linux https://github.... In this video, I'm going to show you how to start mining Bitcoin on Linux/Debian based operating systems. https://bitcoinminingsoftware2019.com/bitcoin-minin...